Tech Specs
Tech Specs
| Output Current 12.5A |
| Output Voltage 24V |
| Output Voltage Range |
| Output Voltage Adjustment Range V1: 22-28Vdc |
| Output Power 300W |
| Output Current Adjustment Range |
| Max Output Voltage |
| Buffering Time - |
| Line Regulation < 0.5% typ. (@ 85-264Vac input, 100% load) |
| Load Regulation < 1% typ. (@ 85-264Vac input, 0-100% load) |
| PARD V1: <100mVpp , V2 SB: <200mVpp |
| Start-up Time < 1000ms @ nominal input (100% load) |
| Hold-up Time > 15ms @ Nominal input, 100% load |
| Dynamic Response (Overshoot & Undershoot O/P Voltage) ± 5% @ 85-264Vac input, 0-100% load (Slew Rate: 0.1A/μS, 50% duty cycle @ 5Hz) |
| Start-up with Capacitive Loads 8,000µF Max |
| Remote ON/OFF - |
| Protective Device - |
| Voltage Drop Between Input and Output - |
| Residual Ripple/PARD (20MHz) - |
| Residual Ripple - |
| Max. Power - |
| Ripple & Noise - |
| LED System Voltage Range in CC Mode - |
| Rise Time - |
| Power Boost Duration - |
| Power Boost Recovery Time - |
| Nominal Input Voltage 100-240Vac |
| Input Voltage Range 85-264Vac |
| Max Input Voltage - |
| Nominal Input Frequency 50-60Hz |
| Input Frequency Range 47-63Hz |
| Nominal DC Input Voltage 125-250Vdc |
| DC Input Voltage Range 125-375Vdc |
| Input Current < 4.0A @ 115Vac, |
| Input Power (Standby Mode) - |
| Efficiency at 100% load > 86% @ 115Vac, |
| Inrush Current < 35A @ 115Vac, |
| Charging Time - |
| Power Factor at 100% load > 0.99 @ 115Vac, |
| Leakage Current < 1mA @ 240Vac |
| Nominal Current - |
| Total Harmonic Distortion - |
| Power Dissipation 0% load: < 4.4W @ 115Vac & < 4.0W @ 230Vac |
| Efficiency @ 10% load - |
| Case Chassis / Cover Aluminium | |
| Indicator - | |
| Cooling System Built-in Fan | |
| Input Terminal - | |
| Output Terminal - | |
| Signal Terminal - | |
| Noise Sound Pressure Level (SPL) - | |
| Input/Output Terminal - | |
| Signal - | |
| Mounting Rail - | |
| Wire - | |
| Protection Structure - | |
| Terminal - | |
| Unit Weight 0.82 kg (1.81 lb) | Dimensions 199 x 105 x 41 mm |
| Vibration (Operating) - |
| Shock Test (Operating) - |
| Operating Temperature -10°C to +70°C |
| Storage Temperature -25°C to +85°C |
| Power De-rating > 50°C de-rate power by 2.5% /°C |
| Operating Humidity < 95% RH |
| Shock Test (Non-Operating) IEC60068-2-27, 30G (300m/S²) for a duration of 18ms 3 times per direction, 18 times in total |
| Vibration (Non-Operating) IEC60068-2-6, 10Hz to 150Hz @ 50m/S² (5G peak); 20 min per axis for all X, Y, Z direction |
| Storage Humidity - |
| Operating Altitude - |
| Pollution Degree - |
| Bump Test (Operating) - |
| Over Voltage Category - |
| Corrosion - |
| Overvoltage V1: < 32V ±10%, V2 SB: < 16V ±15%, SELV output, Hicc-up Mode, Non-Latching (Auto recovery). |
| Overload / Overcurrent > 120% of rated load current, Hicc-up Mode, Non-Latching (Auto recovery). |
| Over Temperature < 75°C Ambient Temp@ 100% load, Non-Latching (Auto-recovery). |
| Short Circuit Hicc-up Mode, Non-Latching (Auto-recovery when the fault is removed). |
| Reverse Polarity Protection - |
| Degree of Protection IP20 |
| Protection Against Shock Class I with Primary Earth connection |
| Input Polarity Protection - |
| Battery Polarity Protection - |
| Wrong Battery Voltage Protection - |
| Deep Discharge Protection - |
| Overload - |
| Overcurrent - |
| Internal Fuse - |
| Insufficient Input Voltage Protection - |
| MTBF > 700,000 hrs per Telcordia SR-332 |
| Expected Cap Life Time - |
| Safety Certificate - |
| Electrical Safety SIQ Bauart: EN 60950-1, EN 62368-1 |
| CE In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU |
| Medical Safety - |
| Galvanic Isolation Input to Output: 3.0 KVac |
| Industrial Control Equipment - |
| Hazardous Location / ATEX - |
| II 3 G ATEX 2014/34/EU - |
| Electrical Equipments of Machines - |
| Electrical Equipment for Use in Electrical Power Installations - |
| Safety Entry Low Voltage - |
| Maritime - |
| Material and Parts - |
| Isolation Resistance - |
| PE Resistance - |
| UKCA In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and |
| Certificates for Other Countries - |
| BIS - |
| KC K 60950-1 |
| Electrical Equipment for Measurement, Control, and Laboratory Use - |
| ITE Safety - |
| SIL3 - |
| Emission Generic Standards: CISPR 32, EN/BS EN 55032, KN 32 FCC Title 47: Class B, GB 9254 |
| Immunity Generic Standards: EN/BS EN 55024, KN 35 |
| Harmonic Current Emissions IEC/EN/BS EN 61000-3-2, Class A |
| Voltage Fluctuation and Flicker IEC/EN/BS EN 61000-3-3 |
| ESD Immunity - |
| Radiated Immunity - |
| EFT - |
| Surge - |
| Conducted Immunity - |
| Magnetic Field - |
| Voltage Dips - |
| Component Power Supply for General Use - |
| Nominal Battery Voltage - |
| Battery Voltage Range - |
| Battery Capacity - |
| Battery Charging Mode - |
| End of Charge Voltage - |
| Battery Fuse - |
| Battery Discharging Voltage Range - |
| Battery Charging Current - |
| Battery Current Consumption - |
| Discharging Current - |
| Recommended Charging Voltage - |
